PD5500
PD5500:2003 former British Standard BS5500
PD5500-Unfired Fusion Welded Pressure Vessels
The following sections are included in the VVD software module.
|
Section |
Description |
|
2.1-2.3 |
Material selection and determination of allowable stresses. |
|
3.4 |
Construction categories and design stresses |
|
3.5.1 |
Cylindrical/spherical shells under internal pressure |
|
3.5.2 |
Domed ends |
|
3.5.3 |
Conical ends and truncated cones |
|
3.5.4 |
Openings and branch connections |
|
3.5.5 |
Flat ends and flat plates |
|
3.5.6 |
Spherically domed and bolted ends of the form shown in fig. 3.5-36 |
|
3.6.2 |
Cylindrical shells under external pressure (including design of stiffeners) |
|
3.6.3 |
Conical shells under external pressure |
|
3.6.4 |
Spherical shells |
|
3.6.5 |
Hemispherical ends |
|
3.6.6 |
Torispherical ends |
|
3.6.7 |
Ellipsoidal ends |
|
3.6.8 |
Procedure by which the departure from the mean circle may be obtained |
|
3.6.4 |
Spherical shells under external pressure |
|
3.8.3 |
Narrow faced flanges |
|
3.8.4 |
Full faced flanges with soft type gaskets |
|
3.8.5 |
Ungasketed seal welded flanges |
|
3.8.6 |
Reverse narrow-face flanges |
|
3.8.7 |
Reverse full-face flanges |
|
3.8.8 |
Full faced flanges with metal to metal contact |
|
3.9.2 |
Characteristics of perforated plates |
|
3.9.3 |
Tubesheets of exchangers with floating heads or U-tubes |
|
3.9.4 |
Tubesheets of fixed tubesheet exchangers |
|
3.9.5 |
Allowable shell and tube longitudinal stresses |
|
3.9.6 |
Allowable tube joint end load |
|
5.8.5 |
Standard test pressure |
|
Annex B.2-B.3 |
Cylindrical/spherical/conical shells under combined loading. |
|
Annex F |
An alternative design approach for compensation using the pressure area method. |
|
Annex G.2.2 |
Radial loads on cylindrical shells |
|
Annex G.2.3 |
External moments applied to cylindrical shells |
|
Annex G.2.5 |
Local loads on spherical shell/nozzle attachments |
|
Annex G.3.2 |
Support for vertical vessels |
|
Annex G.3.3 |
Support and mountings for horizontal vessels |
|
Enq.Cas 5500/122 |
Local Loads on Nozzles |
In addition modules for design of skirt and lifting lugs are included.