|
|
COURSES IN VISUAL VESSEL DESIGN PROGRAM USAGE
WITH SPECIAL FOCUS ON THE EUROPEAN
STANDARD EN13445
This course is intended for both new VVD users and experienced VVD
users that would like to learn to design vessels to the European Standard
EN13445. The course provides a practical design approach and basic
theoretical background in the design of varies pressure vessel components.
The course covers design of the most common pressure vessel components and calculations,
including material design data, cylindrical & conical shells and ends
under internal and external pressure, stiffener rings, nozzles, nozzle loads,
flanges, supports, non-pressure loads, tubesheets and fatigue analysis. The
focus is primarily on the European Standard EN13445, and this standard will
be used in the varies component design. The course has a limited number of
participants and all participants are given a designated PC to enable a
hand-on learning experience.
- Learn about the advantages of
the alternative flange design method to EN1591 and EN13445 Annex G, it
gives a more reliable and more economic design and even more important a
leakfree joint.
- Learn about the advantages of
the alternative tubesheet design method to EN13445 Annex J, it gives a
more economic design, especially for fixed tubesheet heat exchangers.
- Learn about the Alternative
Route that allows the safety factor on tensile stress to be reduced from
2.4 to 1.875.
- Learn to design vessel and
supports (vessels on with external loadings including wind, seismic,
accelerations and blast loads.
- Learn how to deal with
fatigue assessment of a vessel
- Learn about the new Automated
Drawing Production module, easily generate GA drawings as well as
detailed drawings, and export 3D model to STEP file format.
- Examples demonstrating new
features, including the automated drawing production, nozzles located in
ends outside 0.8D limit, vessel supports, lifting lugs/lifting trunions
(horizontal to vertical lift/tailing lugs welded to skirt base ring),
attachment lugs etc.
COURSE PROGRAM
|
Day 1
|
|
|
0930 – 0945
|
Introduction
|
|
0945 – 1200
|
Program overview and functionality, modes of
operations,
process cards, VVD workplace, global coordinate system, database
information etc. Material data and safety factors, creep properties, test
groups & extent of NDT, weld
joint coefficients, test pressures, design methods, cylindrical &
conical shells and ends under internal and external pressure, stiffening
rings, vessels outside tolerance limits.
|
|
1200 – 1230
|
Lunch break
|
|
1230 – 1600
|
Design of isolated nozzles, groups of nozzles,
nozzle loads, lifting
lugs, lifting trunions and support lugs.
|
|
Day 2
|
|
|
0900 – 1200
|
Comparison between design methods, allowable
stress and other specific requirements for the standards EN13445, PD5500,
AD2000 and ASME VIII.
Recent development in the VVD software and EN13445
standard.
Flanges to EN13445 Section 11(Taylor Forge) and
Alternative Method for flange design according to EN13445 Annex G and
EN1591.
Design of saddle support, skirt support, leg
support and bracket supports, non-pressure loads, tall tower analysis
including external loads (wind, blast, seismic, wind induced vibrations
etc.)
|
|
1200 – 1230
|
Lunch break
|
|
1230 – 1515
|
Fatigue analysis to
EN13445 section 17.
Design of tubesheets to
EN13445 section 13 and Annex J, tubebundle, tubelayout and expansion
bellows for shell & tube heat exchangers.
|
|
1515 – 1530
|
Summary & future development
|
|
COURSE NO.: 0608
|
LOCATION: AMSTERDAM, THE
NETHERLANDS
|
|
Time & Dates :
|
25th. and
26t. of May
|
|
Wednesday 25th.
of May, 0930 - 1600 Hours
|
|
Thursday 26th. of May,
0830 - 1530 Hours
|
|
Location
:
|
Radisson Blu Hotel Amsterdam Airport
Boeing Avenue 2
NL-1119 PB Schiphol-Rijk
Tel: +31 20 655 3131
|
|
|
|
Costs :
|
EURO 900.-
for two days including course material and lunch.
EURO 450.- for one day only, including course material and lunch.
|
|
Registration
& Deadline
|
The
deadline for registration is 14 days ahead of course start. Please note
that any cancellation later than 14 days prior to course start will be
fully invoiced.
For registration - Please send an email to: ohmtech@ohmtech.no
|
|
COURSE NO.: 0811
|
LOCATION: HELSINKI, FINLAND
|
|
Time & Dates :
|
|
26th. and
27th. of October
|
|
Wednesday 26th.
of October, 0930 - 1600 Hours
|
|
Thursday 27th. of October,
0830 - 1530 Hours
|
|
|
|
|
|
|
Location
:
|
Polartest OY in Vantaa:
In cooperation with
Dekra/Polartest OY
http://www.dekra.fi
|
|
|
|
Costs :
|
EURO 800.-
for two days including course material and lunch.
EURO 450.- for one day only, including course material and lunch.
|
|
Registration & Deadline
|
is 10
days ahead of course start.
For registration - Please send an email to: ohmtech@ohmtech.no
|
COURSE
LOCATION & PRACTICAL INFORMATION
|
COURSE NO.: 0408
|
LOCATION: OSLO, NORWAY
|
|
Time & Dates :
|
7th. + 8th.
Of April
|
|
Thursday 7th.
Of April, 0930 - 1600 Hours
|
|
|
Friday 8th.
Of April, 0830 - 1530 Hours
|
|
Location
:
|
IT Fornebu, OSLO
Address: Martin
Lingesvei 17-25, 1330 Fornebu
Phone: +47 67827232
|
|
|
|
Costs :
|
NOK
7.500.- for two days including course material and lunch.
NOK 4.500.- for one day only, including course material and lunch.
|
|
Registration
Deadline
|
The
deadline for registration is 14 days ahead of course start. Please note
that any cancellation later than 14 days prior to course start will be
fully invoiced.
For registration - Please send an email to: ohmtech@ohmtech.no
|
COURSE LOCATION & PRACTICAL INFORMATION
|
COURSE
NO.: 0411
|
LOCATION:
STAVANGER, NORWAY
|
|
Time & Dates :
|
22nd. + 23rd. Of September
|
|
Thursday 22nd. Of September,
0930 - 1600 Hours
|
|
|
Friday 23rd. Of September,
0830 - 1530 Hours
|
|
|
Location
:
|
Positiv Opplæring AS,
Sandnes
Address: Welhavensvei
15, 4318 Sandnes
Phone: 51974700
|
|
|
|
Costs :
|
NOK 8.000.-
for two days including course material and lunch.
NOK 4.500.- for one day only, including course material and lunch.
|
|
Registration Deadline
|
The
deadline for registration is 14 days ahead of course start. Please note that
any cancellation later than 14 days prior to course start will be fully
invoiced.
For registration - Please send an email to: ohmtech@ohmtech.no
|
|
COURSE NO.: 0508
|
LOCATION: COPENHAGEN, DENMARK
|
|
Time & Dates :
|
TBA
|
|
|
, 0930 - 1600 Hours
|
|
|
, 0830 - 1530 Hours
|
|
Location :
|
DBVision AS
Fensmarkgade 3
2200 Copenhagen
Tel: +45 35362144
http://www.dbvision.dk
|
|
|
|
|
Costs :
|
NOK 8.000.-
for two days including course material and lunch.
NOK 4.500.-
for one day only, including course material and lunch.
|
|
Registration & Deadline
|
The deadline
for registration is 14 days ahead of course start. Please note that any
cancellation later than 14 days prior to course start will be fully
invoiced.
For registration - Please send an email to: ohmtech@ohmtech.no
|
|
COURSE NO.: 0608
|
LOCATION: STOCKHOLM, SWEDEN
|
|
Time & Dates :
|
TBA
|
|
|
|
|
|
Location
:
|
Signup Software AB
Hallonbergsplan 5
S-17452 Sundbyberg
Tel: +46 8 445 3840
http://www.signup.se/kurslokaler/karta.htm
|
|
|
|
Costs :
|
NOK
7.500.- for two days including course material and lunch.
NOK 4.500.- for one day only, including course material and lunch.
|
|
Registration & Deadline
|
The
deadline for registration is 14 days ahead of course start. Please note
that any cancellation later than 14 days prior to course start will be
fully invoiced.
For registration - Please send an email to: ohmtech@ohmtech.no
|
|
|
|
